manufacturing sensors and ampoules
Wet Process Options
Wet Process Options
  • Wetted surfaces 316 L stainless
  • Wetted surfaces electropolished to 10 Ra max
  • Pressure rated up to 300 psi
  • ±1.5 mm trigger points at each discrete level
  • ±0.75 mm is typical repeatability of trigger points
  • Lowest trigger point is 0.15” from bottom of sensor
  • Customizable setpoints and relay configurations

level-sensors
Control Box Specifications
Control Box Specifications

• Input Power: 24 VDC
• Output Option 1: Relay
• Output Option 2: 4-20mA Interface box
• Output Option 3: 4 point – 0-5V (dry/wet) Interface box

 

sensor specification details
Liquid Level Sensor Specifications
Liquid Level Sensor Specifications

• Probe Diameter: ½” or 3/8” diameter probe
• Mounting: Female ½" or ¾" VCR
• Probe Material (wetted surface): 316L
• UHP surface finish: <10 Ra max electropolished to meet Semi F19 standard
• Pressure Rating: 600 PSI
• He Leak Checked: 1 X 10-9cc sec
• Probe Temperature: -30°C to 100°C (Options up to 200°C)
• Cable Temperature: -30°C to 100°C
• Trigger pt Accuracy: ±1.5mm
• Trigger pt Repeatability: Typical ±0.75mm

manufacturing sensors and ampoules
Wet Process Options
Wet Process Options
  • Wetted surfaces 316 L stainless
  • Wetted surfaces electropolished to 10 Ra max
  • Pressure rated up to 300 psi
  • ±1.5 mm trigger points at each discrete level
  • ±0.75 mm is typical repeatability of trigger points
  • Lowest trigger point is 0.15” from bottom of sensor
  • Customizable setpoints and relay configurations